The client had installed an MBR plant that was suffering blockages and high levels of maintenance and operational costs. The existing screens had a 3mm perforation but were still allowing too much through to the MBR’s, 1.5mm perforated drum screens also supplied by CSO were installed and a system was needed to remove the solids and convey them into a skip.
Removal and compaction of solids greater than 1.5mm in two directions from the drum screens into a waste disposal skip.
Design and manufacture 1 No Lackeby Shaftless screw press to reduce the bulk of the screenings and convey them to a skip.
Successfully reduced the bulk of waste and depositing it into a skip.
Model: SSP 260
Capacity: 3 m3/hr
Dry Solids, Out: 25%